Sample Name (this is a folder name - no spaces, only A-Z, a-z, 0-9, underline and hyphen)Д. Log on to the instrument computer and select the holder number. Put your sample (with special cap) in one of the 96 holders in the carousel outer ring. To submit a sample, follow the simple steps below:ДЎ. So the total capacity of the SampleJet is 96 + (5 X 96) = 576 samples! There are also five racks in the carousel containing up to 96 samples each in 4' NMR tubes (also 5 mm OD). Then the sample is ejected and the gripper arm removes it from the shuttle (which releases the clamp) and puts it back in its slot. Analysis is fully automated: Spinning the Sample, Automatic Tuning and Matching of the Probe (ATM), Automatic Shimming ('topshim'), Receiver Gain Adjust, Data Acquisition and Data Processing. The spinner (with sample) is then lowered into the magnet for analysis. The spinner has a 'clamp' that is held open while the tube is inserted, and then closes to grip the tube tightly. The spinner (or 'shuttle') is held in place at the top of the magnet bore and the gripper arm inserts the NMR sample tube into the spinner. A robot arm with a 'gripper' picks up the sample BY THE CAP and takes it over to the NMR magnet. These are 7' NMR tubes (5 mm OD) with a special purple cap sold by Bruker. How it works: The SampleJet has a carousel that holds 96 NMR tubes in the outer ring. SampleJet Automation using Bruker NEO 500 or Avance III 400 NMR Spectrometers

Nmr software similar to mestrenova